Heartbeat (AlexDz) Mac OS

Heartbeat Logging Setup & Configuration Example Logit.io
Heartbeat (alexdz) Mac Os Download
Analyze MacOS AMP Diagnostic Bundle For High CPU - Cisco

‎Read reviews, compare customer ratings, see screenshots, and learn more about Heartbeat Health - Heart App. Download Heartbeat Health - Heart App and enjoy it on your iPhone, iPad, and iPod touch. ‎Cardiovascular disease is the costliest and deadliest worldwide, but it doesn't have to be. Heartbeat Heartbeat is a simple mini-game in which you have to both continuously beat your heart (Up and Down arrows), and run away from the deadly sonic waves being emitted from the trumpets for as long as you can!

【More Compatible】Bluetooth connection 3.0, compatible with latest operating systems: Windows 7 & later, Windows Phone 7 & later, iOS8 & later, Android 4.0 & later, Mac OS X & later, easily pair with your Iphone, Ipad, Smart phones, laptop or tablets.

Step 1 - Connect to Helios64 serial console¶

Under Windows¶

Important

For Windows version prior to Windows 10, you will need to install the FTDI driver in order to access the USB to serial bridge used by Helios64. You can find the driver here.

Download PuTTY and install it on your computer.
Make sure your serial communication device is already detected by system.
Select connection type serial.
Setup serial port settings (Serial line : COM3 and Speed : 1500000), then press 'Open'

Note

The serial port detection may vary on different system, please make sure to check the device manager to get the information of correct serial port to connect to Helios64. Check this link to learn how to determine the right COM port.

Under Linux (via Terminal)¶

1. Install picocom

Use apt-get under Debian/Ubuntu

Use yum under RHEL / CentOS / Fedora Linux

2. Connect to serial with picocom

To exit picocom do Ctrl-a then q button in squence

Note

Using command _ls -la /dev/ttyUSB_ you should be able the find the USB to serial bridge device used by Helios64. Under Linux the device will be named /dev/ttyUSBx, where x* is a digit.

Under Mac OS (via Terminal)¶

Important

For Mac OS you might need to install the FTDI driver in order to access the USB to serial bridge used by Helios64. You can find the driver here.

Connect serial using the screen command

To exit the session do Ctrl-a then Ctrl-k

Note

Using command _ls -la /dev/tty.usb_ you should be able the find the USB to serial bridge device used by Helios64. Under Mac OS the device will be named /dev/tty.usbserial-xxxxxxxx, where xxxxxxxx* is some serial number.

Step 2 - Power-Up Helios64¶

Now that everything is ready you can plug-in the AC adapter and push the Power Button.

If you are using Helios64 without an enclosure:

You should see Helios64 boot logs on the Serial Console.

If you missed the boot logs, another way to check if your system has fully booted is to look at the System LED which acts as system heartbeat. If Operating System has booted properly and is alive, the System LED should be blinking.

Step 3 - Log in¶

Note

You might need to press Enter for the login prompt to come up.

If system didn't auto logged-in. Default credential for Debian or Ubuntu image

You will be prompted to change the root password and then create a new user account.

Step 4 - Check/Set IP address¶

Check IP address¶

By default Helios64 will try to obtain an IP address via DHCP. To figure out what is the allocated IP address you will need to type the following command in the console.

Here the IP address of Helios64 is 10.10.10.1.

Set IP address¶

If you wish to manually configure your IP address you can use the armbian-config tool.

Select the Network section:

Navigate to IP to configure your IPv4 address:

Heartbeat Logging Setup & Configuration Example Logit.io

Select the Ethernet interface you want to assign a fixed IPv4 address. In this case we select eth0 which correspond to LAN port 1:

Select Static:

Provide the IP Address, Netmask, and Gateway information that you want to assign:

Press ESC till you exit armbian-config tool.

You will have to reboot for the network settings to take effect.

Info

You can also refer to the following Debian Wiki Page for advanced network settings.

Step 5 - Connect to Helios64 via SSH¶

You can now connect by SSH to your Helios64 to carry on with your configuration.

Here is the example when we use linux client:

You can use putty as the SSH client if you are using windows:

What to do next ?¶

You can use armbian-config which provides an easy way to install 3rd party applications like OpenMediaVault, NextCloud, Syncthing, Emby and many more.

Here an example on how to install software OpenMediaVault (OMV) using the armbian-config.

Select Software section:

Navigate to Softy:

Then choose OMV, to install the OpenMediaVault:

Wait the install process to complete:

Now you should be able to connect to OpenMediaVault (OMV) Control Panel.

Open your web browser and go to the one of the following addresses :

http://helios64.local
http://xxx.xxx.xxx.xxx (How to check Helios64 IP address)

Default credential :